History Electrolux Service

History of the brand Electrolux Service


In 1984 in Bitola, Electrolux company was founded in electrical service for domestic products and installation of electrical systems for industry and households and production of electric heaters and heaters and household and called KLIMALUX, Electrolux, Frinko, WMF.

The founder of Electrolux is Dimche Palenzo born 1964. and his family. During the development of the company during the Egzistiranjoto team spent quite persons who have contributed and are important people who are mentioned in the history of Electrolux.

In 1990 Electrolux Bitola company began production of heaters Klimaluks - then one of the most important products in the company Electrolux.

Since 1990. d begin production of rubber products for Idustrijata the Macedonian market in this period he worked as a travel agent for the sale of rubber and electrical equipment.

Since 1992. Begin production of electric heaters, which covered 70% of the market in Macedonia

Strolling through the cities and states, Dimche Palenzo seen in store and analyze the industry's needs of society in Macedonia, which at that time was a novelty and technical progress and trade. Dimche Palenzo come to the conclusion that such a miracle is necessary for all the house and sell it, you can simply show the client. Dimche Palenzo contacted representatives of his company Electrolux and offered their services, but the answer was obtained, as the company is pleased with the work of negoviote agent. After a while, Dimche Palenzo decided to begin production and trade of electrical goods and technical rubber products. There is at this time the company began to manufacture products and to serve the economy.

In Bitola Eelektroluks pretsedateleli met with producers from other countries and became an advocate for the whole world that relationship drigi Firms sell large quantities of electrical products. The number is very large, and the head of the company he and his associates. Dimche Palenzo fulfill its promise, and a year later became general agent and Kanthal Kentavros.

From the Electrolux Service

After a while, Dimche Palenzo in 1992. proposes to use proizvodit heating company Electrolux to reduce the weight of the heater and automation. Once in 1992. Because Straegija for presenting Sostvenite Products and for presenting the international markets have presented transcription ELECTROLUX After the two years, the demand began to exceed supply, and Dimche Palenzo started looking for space to build a new plant, but at this point the company ELECTROLUX expressed its proposal to merge. Dimche Palenzo for this option is advantageous for two reasons: it is released from a competitor, and he did not have to build a new factory, as he received the Klimaluks. In 1990, the agreement was reached, and a year later, the company was renamed ELECTROLUX.

Since 2009 has already started with plans to build a new factory in the Free Zone in Macedonia apart for household and industrial and electric heaters and rubber products and spare parts

Technological advances

In 1994, upon the proposal of ELEKTROLUX Dimche Palenzo announced a new model of heater model C. It brought us even more popular. Model V had shaped portable equipped with avtomaska regulation with different dimensions. Heaters of this type were produced by other companies almost to the end of the XX century. For convenience, heaters. In 1990, after the creation of the heaters, ELEKTROLUX produces pure hot air temperatures of the economy and 70% of power for homes and industry.

The production of heaters and Rubber Products won target market of Macedonia and Kosovo

In 1994, Dimche Palenzo parallel with its position Chairman of the Board and went into politics and representation of their country in the world in culture and sport. In 1994, became president of Body Biding Federation of Macedonia

In 1996 the company launched its first refrigerator industry and restaurants. He still does not look like our modern cold storage, but it was very convenient in everyday life.

The conquest of Europe

In 1998 the company continues to grow. In England, France, USA and Australia opened offices. In the 90's. for war production fell, and some plants had to the military.

In 1999 the spelling of the name of the company acquires a modern look. Now this company ELECTROLUX, and later appears modern logo.

In 90-00 years, the company expanded further. Were received by the Macedonian factories dulling and develop his strategies and sales. In addition, the group joined metal recycling company manufacturing of metal products and cooperation. In 1999 ELECTROLUX gets selling products in large institutions embassies and consulates.


In 1997-2004 the company is a kind of restructuring. Now the focus is on a limited number of major brands, not many small and little known. Reduced staff, closed several warehouses and industries. The main focus of the company's household, professional and electric heaters and rubber products and metal products.

In 2000, ten products companies received awards in the competition red dot red dot Design Award. The competition evaluates the level of quality, ergonomics, functionality, compliance with environmental standards.

In Greece, the company appeared in 1988, in Serbia in 1994 by Greek companies collaborating since 1985 on opening branches in all countries in the Europe of Electrolux. Now the company is developing the distribution of its products in Alabanija Kosovo, Greece, Serbia. In World ELECTROLUX works in two directions. This division of household and professional equipment electric heaters and rubber products and spare parts

Branch distributed machines household washing, refrigerators, vacuum cleaners, microwave ovens and many other products electric heaters and rubber products and spare parts. Division of professional equipment distributes professional kitchen and laundry equipment, and equipment for cafes, hotels, restaurants, resorts and airports.

Today ELECTROLUX - one of the largest companies in the world. Its products are sold in more than 150 countries The basic rules of the company - two products differ in value only if it has a different set of features and quality that always equally good. Today collaborates with many other companies of the world in different areas .klientite can easily see and needs require products that are required by E-Excellence Center for Information Mozilla everyone uses and recommends products from the program of Electrolux

Dear customers and partners, with great honor and pleasure to offer you programs Electrolux:

- Original Products Electrolux top quality "New Era 2014" -

We try to satisfy the needs of global customers through services and products with high quality

We are what we do, always. Excellence is not an act but a habit” (Aristotele)

History of refrigerators

The prototype of the domestic refrigerator unit is considered to be a French engineer F. Carre, he proposed in 1860 and designed for water ice. In 1862 an exhibition in London of the World F. Carre shown based on a similar principle car better performance for the production of block ice. The car was a small stove with built container for liquid ammonia. Ammonia fumes due to heating, cooling walked into the boiler tube. Because evaporation cooling water around the boiler freezes, forming ice. In the car, Kara, however, failed to directly cool the room air or liquid, as in modern refrigerators. To solve this problem together experts from many countries. We keep looking for more efficient and compact power source. In particular, in Sweden, it was suggested in the car instead of the stove Carre use gas burner.

The impetus for the creation of modern domestic refrigeration equipment contributed to the development in 1874, Munich scientist K. Linde refrigeration machine. Exploring the various existing at the time of the cold production based on acceptance and future use of artificial ice, came to the conclusion that their efficiency is very low and that direct cooling of indoor air or fluid will be more effective and profitable. To convince brewers, Linda K received funding to develop cooling machine. First he created a refrigerator that runs on methyl ester was tested in Munich brewery. Made in 1874, a second car that runs on ammonia, until 1908 worked in the brewery in Trieste. These machines, and these models had an excellent performance, reliability, and technical level of all previous ice cube makers.

In 1908 in Paris at the International Congress of cold, had taken on the case favors the development of refrigeration equipment for home and melkopromyshlennyh needs:
 "Taking into account the benefits and advantages it can bring agriculture, trade and industry of all countries in the development of cooling, Congress asked the state authorities of all countries to facilitate the cooling device in home appliances, agriculture and small industrial sector, especially to limit regulation to a minimum and formalities relating to the use of cooling machines. "

The first household refrigerator compression appeared in 1910 in the US, and a year later the American company «General Electric» began production of cooling machine "Odifren" for household refrigerators and commercial cabinets, named after its creator - French physics professor Marcel Odifrena . Odifrena machine whose design was developed in 1894 (German patent No. 82 314 1895), became the first automatic refrigeration machine. Advantages of this machine: the high heat transfer rate, absence of seals and valves, easy maintenance and repair of refrigerators (1-2 times a year and change belts 2 times a year, two bearings lubricated).

Each year the number of machines grew, and in 1923 there were almost 20,000 domestic refrigerators. These refrigerators were shaped breast with dark wood paneling, cost $ 900 or more, and have been a luxury. Chillers "Odifren" issued before 1928

 The first household refrigerator with automatic temperature control chamber, designed by Copeland, was produced in the US in 1918 and in 1925 were released about 64,000 as a tool used sulfur dioxide or ammonia. The compressor is driven by a belt drive from the engine. The cooling unit is installed at the top. Wooden cabinet with cork insulation had a wall thickness of 140 mm.

In 1926 the company «General Electric» was founded sealed refrigerator, later named "Monitor Top". In the late 20s he began producing refrigerators in the form of an all-metal enclosure.

Because active organization in the US production of domestic refrigerators as coolants by the end of 20s of XX century. widely used sulfur dioxide and ammonia. After graduating in 1930 the company "Kinetic Kenikalz Inc." (USA), the first series of dichlorodifluoromethane, belonging to the group of chlorofluorocarbons (CFCs), and the organization of industrial production in 1932, many refrigerants except ammonia almost completely disappeared from the market. The company also introduced a trade name Freon-12. Marking of cooling with the letter P, and the name of Freon became generally accepted. The first refrigerators worked cooling R12 (company «General Electric») appeared in the 30s.

In 1936, the US power plants for the production of compression refrigerators R12 were 2 million units and German -. 40000 pcs. one year.

Starting from the 30s, the US is the rapid development of the production of household refrigerators:
 In 1930 the company "Fridzhirer" (USA) started production of a new type of refrigerator - double chamber which are not, however, although widely used.

In 1931 the company «Serval» (USA) is a pioneer in sealed cars regulator capillary tube is allowed to abandon the more complex the float valve and the receiver, and helped to improve their security.

At the same time the organization of manufacturing refrigerators floor, wall, built from the bottom and side mounted freezer. Rule the production of rotary compressor (company KEIVINATOR) and 2-evaporative cooling systems for vertical freezer, later received universal acceptance in the world.

Market demand cooling unit is moved from the top under the bottom of the government, despite the complexity of the design and production more expensive.

In 1957, the US market for the first time there were refrigerators with forced air circulation - a system of «No Frost» neobmerzayuschimi walls. In 1959 it established commercial production. At present, they are most common in the US and about 70% of the production of all types of refrigerators.

After 60 years in the US are developing new construction and insulating materials (ABS plastic and polyurethane foam - polyurethane foam), magnetic door seals, high engine speed compressors, which made it possible to increase the capacity of refrigerators and decreasing temperature at low temperature chamber at the same time reducing production costs and prices. Introduction of new production technology, allowing to produce several models by merging units and up to 80%, with total program output of more than 0.5 million units. year, including production lines for filling cabinets foam - thermal insulation. The first multi-purpose multi-chamber refrigerator with ice maker and distribution of cold water and ice through the door to the US in 1973

In Europe, production of compression refrigerators developed less active than in the US and marked the beginning of 1912 production. Manufacturer AEG (Germany) has defeated two-door fridge capacity of 160 liters with dimensions 1600x750x1900 mm. The outer wall face with white tiles in the refrigerator compartment mounted grilles galvanized shelves. The original price was 1750 DM.
-in 1955 Bitola opened a new plant for cooling Tech George Naumov Kopreracija with the East German brand AEG the first Refrigerators L 120 liters which began with the production of household refregeration for Yugoslavia as a whole. Programme prepared whole and spare parts for refrigerators and compressors for small and large Chilled Refrigerators .With sospstevni Interoute foundry, cevara, Grande Comore, Comoros Mali etc.
In 1975 together with Koncar from Zagreb and performing together with one name Koncar as as a subsidiary of Koncar and running cooling plants in the world in Russia, Asia, Africa
In 1980. Dispense with Koncar Zagreb and builds sopsteven image BRAND Frinko still exists as privat name and brand Frinko and works for Own needs and fracture system for all major manufacturers of household refrigerators and Industry Electrolux, Zanussi, Koncar and is a major driver and manufacturer refrigeration of household and industrial products in Yugoslavia and the world. To date exists as a factory for the production of cooling technique and household refrigerators and Industry
1928 - the Leipzig Fair 8 companies submitted compression refrigerators with a capacity of 140-500 liters.

In 1927 in Germany were the first absorption refrigerators with water cooling. When you use the best insulation for time spent power was 1750 W refrigerator, power consumption - 5 kVt-ch / sutki, the price of 6750 DM. In comparison with modern analogs, these same figures were: 100 W, less than 1 kVt-ch / sutki, 400 DM, respectively. Serial production of absorption chillers launched in Germany in 1933

Production of refrigerators with forced air company "Bosch" (Germany) started in 1973

The first refrigerator, made in Japan appeared in 1926 and regular production started with 1933

 The largest number of domestic refrigerators produced in the United States. Thus in 1933 in the park of refrigerators in the US is 5825000, UK -. 100000, Germany -. 30000, Sweden -. 17000, Norway -. 1.0 thousand. In Russia, unit produced and imported samples of cabinets glaciers.

In Japan, the refrigerator walls neobmerzayuschimi "No ice" appeared in 1967 (Toshiba), mass production has been established since 1977 and in Europe - from the 80s.

In Japan, in 1978, speaks disposable boxes flooded evaporator and condenser, which dramatically reduce the weight and increase the utilization of useful volume in 1983 - high performance compact rotary motor compressors with material consumption three times lower than that of the crank -contact rod (reducing overall permitted to increase the size of refrigerators capacity of 9 liters and reduce electricity consumption by 40-60%), flexible technology introduced with rapid change and the transition from model to model for dozens of minutes 1991 -. there were refrigerators with the possibility of opening a door in any direction without Perenaveski.

In 80 years of mastering refrigerators with zapenennymi evaporators in Italy and Germany, multichamber fridges in Sweden (including the use of plastic for external cabinets) and Japan (6 doors), embedded electronic control high volume production. In Germany, begin to use waste heat to heat the condenser water for household purposes, and in Europe in the 90s appearing texture steel rolling, are models of domestic refrigerators with adjustable shelves, cantilevered into the chamber, the possibility perenaveski doors.

In 1992 he created gas coolers desert regions (Sweden). Development of electronic diagnostic system to inform about temperatures in refrigerators and freezers, damage to power, the door is closed, the need to clean the condenser (Whirlpool, USA), and control the temperature in the refrigerator and freezer, voltage, system defrosting removal of melt water, ice machine operation (GE, USA), electronic systems include speech synthesizer, voice warns the owner for violation of working conditions and inadequate use of refrigerator (AEG, Germany).

Increase your revenue from Spare Parts and Services!

Turn existing parts catalogs into clickable parts finders

Add to your webshop, service portal or anything else with parts in an online world

Why do I need http://espares.eurolux.mk  in my Webshop or Service Portal?

Electrolux and Eurolux  is a multinational company which was founded in 1984. The company is a distributor of accessories and spare parts for professional catering equipment, bars, and the domestic sector. Electrolux and Eurolux   has been part of the Electrolux and Eurolux  since 2005 and our headquarters are in Bitola and Skopje , Macedonia.

Thanks to its wide range of products, with a high-stock rate, a state-of-the-art logistics system, a modern web shop, and a high level of service, Electrolux and Eurolux   is able to process orders received by 2.00 pm on the same day.

  The offer is divided into accessories and spare parts for Cooking, Coffee & Vending, Refrigeration and Household and includes 6,000,000 items in the database, 63,000 of which are always in stock. The product range is constantly being extended, both in terms of brands and product families.

  The logistics center, with an area of 10,780 sqm, is equipped with 8 automated stacker cranes and is managed by integrated software. This enables automatic picking of articles and the updating of the web shop in real time.

  The technical assistance service is staffed by professionals with in-depth expertise in the world of spare parts. This provides specialized support in choosing the right spare part for each piece of equipment, enabling service centers to respond quickly to their customers' needs.

Electrolux and Eurolux   is present with a global sales network of distributor-partners and authorized points of sale not only in Italy but also e.g. in Macedonia ,Srbija,Great Britain, the Greece Albanija, and the United States. Electrolux and Eurolux is part of a global network, in order to offer an increasingly widespread distribution of spare parts.


A truly successful Commerce platform is the heart of your ecosystem. http://espares.eurolux.mk , http://espares.electroluxservice.com.mk creates and links clickable drawings to all your relevant, web-based systems: internal and external.
Whether it concerns your Webshop, the Service portal for technicians, or a Help system for all your end users.

Offer your visitors the certainty of selecting the right parts

Selecting the correct part from a drawing – such as an exploded view – is much easier than selecting from a list of photos or a list of part numbers. Not to mention entering a multi-character part number into a search system.

With spare parts.live, your visitors click through drawings while additional part information is displayed. This gives them maximum certainty when ordering or requesting information for the right parts.

Reduce returned orders

Research shows that a quarter of all returned products are due to incorrectly chosen products. Wrong, because products are not adequately shown, in lists with only photos, or only lists with product numbers and a brief description. By using original parts drawings, you make it a lot easier for the visitor to make the right choice. If these parts also become clickable, this will result in fewer incorrect orders.

Saving costs

It is well known that the greatest cost savings can be achieved by reducing the number of incorrectly selected parts. The costs of the logistics and workflow involved in a return shipment are enormous. Who doesn’t want to bring costs down? Make sure the correct parts are selected!  

Increase conversion

Increase your conversion rate effectively because visitors choose your Webshop as their preferred shop. Returning visitors are good for better scores, more mouth to mouth advertising and even more exposure.

Increase profit

More profit is made by reducing the cost of returned products. In addition, a good and simple selection system contributes to the pleasure and convenience that your visitors experience. A Webshop or Service Portal that users like to visit automatically attracts more customers. More customers, more sales, more profit.

Companies  that  take advantage of; http://espares.eurolux.mk . http://espares.electroluxservice.com.mk



Contact & Support

Telephone-Bitola: +389 (0) 47 203 330
Telephone-Skopje: +389 02 3298 130
Telephone-Skopje: +389 02 3225 230
Fax:              +389 (0) 47 203 900
Mobile Phone Number: +389 (0) 70 237 108
E-mail:   This email address is being protected from spambots. You need JavaScript enabled to view it.

 Electrolux Logo

Visitors Counter

This Week
Last Week
This Month
Last Month
All days

Your IP:
Server Time: 2024-06-16 06:26:49

Family  Brand  Electrolux 


Follow us